Updating The Firmware Or Configuration - Siemens SINAMICS S120 Function Manual

Drive functions

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Updating the firmware or configuration

Series commissioning via the Web server

You can load a firmware or a configuration to the memory card of the drive with the aid of the

Web server (see Updating firmware/configuration on the memory card (Page 411)).

One of the most important applications for the configuration update is the series

commissioning via the duplication of a master configuration. The individual steps are listed in

the following:

1. Configure the master machine (STARTER offline and also online).

2. Switch STARTER offline.

3. Execute the "Load to file system" function in the STARTER.

Use the "Save compressed (.zip archive)" option.

4. Download the master configuration via the Web browser on the other drives (cloning).

5. If the know-how protection was not activated in the master configuration, you can now

finely adjust the configuration for the individual drives.

If the know-how protection was activated, you require a password for the fine adjustment

of all parameters on the individual drives that are not listed in the exception list.

You can find detailed information about the following parameters in the SINAMICS

S120/S150 List Manual in Section "Parameters for write protection and know-how

protection":

• Parameters that can be changed with active know-how protection,

• Parameters that can only be read with active know-how protection,

6. Activate the know-how and copy protection for the individual drives, if required.

Drive functions

Function Manual, 11/2017, 6SL3097-4AB00-0BP5

see Section "Parameters with KHP_WRITE_NO_LOCK"

see Section "Parameters with KHP_ACTIVE_READ"

Basic functions

7.30 Web server

Show Quick Links

Table of Contents