Active Vibration Suppression (Apc Without Sensor On The Load Side) - Siemens SINAMICS S120 Function Manual

Drive functions

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Active Vibration Suppression (APC without sensor on the load side)

The function "Active Vibration Suppression" (AVS) is a robust procedure for vibration

damping without requiring a direct measuring system. Only the current and speed actual

values signals measured at the motor are used. The function AVS can be used, in particular,

also for drives with linear or torque motor that often do not use any direct measuring system.

In order that the function can be successfully used, the oscillation to be dampened must

have a sufficient effect on the axis motor. This means that the oscillation must be able to

measured in the motor current.

Before the function can be optimized, the speed controller loop must first be optimized as

this forms the subordinate control loop.

The function AVS can also be used when a direct measuring system is available. It is

possible that this function offers advantages over using a direct measuring system.

Generally, the ruggedness of this function is better, e.g. when the mechanical system

The control without a sensor can also be combined with the P component (p3760/p3765) of

the direct measuring system if a direct measuring system exists. This increases the

suppression of disturbances and also increases the accuracy.

Drive functions

Function Manual, 11/2017, 6SL3097-4AB00-0BP5

8.14 Advanced Position Control (including Active Vibration Suppression)

Function modules

Show Quick Links

Table of Contents