Toshiba GR200 Series Instruction Manual page 721

Centralized busbar protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

Caution for storage

You have to pack an IED in the original box after the IED is inspected, if the IED is not required

to be installed now; and you have to store it in dry and clean condition.

Recommended storage condition:

- Temperature:

- No condensation

Handling precautions

Modules of the IED should be handled in the electro static charge free environment. That is,

the user shall use an anti-electrostatic-wrist-band; and it is grounded.

Before removing a module, ensure that you are at the same electrostatic potential as

the equipment by touching the case.

Handle the module by its front plate, frame or edges of the printed circuit board. Avoid

touching the electronic components, printed circuit board or connectors.

Place the module on an anti-static surface, or on a conducting surface connected to

You have to check carefully the electronic circuitry for your handling area, which is defined in

the IEC 60747 standard.

0 degree Celsius to +40 degree Celsius

6F2S1931 (0.20)

Centralized GRB200

(Soft: 030, 031, 032, 033, 034)

Show Quick Links

Chapters

Table of Contents