Toshiba GR200 Series Instruction Manual page 530

Centralized busbar protection ied
Hide thumbs Also See for GR200 Series:
Table of Contents

Advertisement

LAN operation
LAN address (IP address)
10.2.1
When LAN module(s) are provided, the IED can communicate using the "Transmission Control
Protocol/Internet Protocol (TCP/IP)". The user can set the information about IP addresses and
other TCP/IP. Table 10.2-1 shows the setting items provided for the LAN†.
These setting values have been included in the CID file of the IEC61850. When the IED starts
up and if values except for the 0.0.0.0 values or default are set in the CID file, the CID
information is taken into the IED.
As the setting values have been included in the CID file, the user can define these values with
the engineering tool (GR-TIEMS). If the user wishes to modify those and the IEC61850 is used
to communicate, the user can change those with the GR-TIEMS. The user is required to write
both of setting values and IEC61850-CID file into the IED.
Table 10.2-1 TCP/IP settings of LAN modules
Setting items
IPADDRESS1‡
LAN at
SUBNETMASK1
C11
GATEWAY1
(Port A)
IPADDRESS2‡
LAN at
SUBNETMASK2
C12
GATEWAY2
(Port B)
IPADDRESS3
LAN at
SUBNETMASK3
C13§
GATEWAY3
When wishing to change addresses, the user can use this setting menu. Figure 10.2-1 shows
the setting menu provided to change the addresses‡.
Figure 10.2-1 Local LAN setting menu (on IED screen)
†Note: For more information with regard to the communication modules, see Chapter
Technical description: Signal processing and communication module
‡Note: Three LAN modules are provided at C11, C12, and C13 when triple LAN modules
are ordered; hence, the user should assign triple address respectively. (Just for the
Range
0.0.0.0–255.255.255.255
0.0.0.0–255.255.255.255
0.0.0.0–255.255.255.255
0.0.0.0–255.255.255.255
0.0.0.0–255.255.255.255
0.0.0.0–255.255.255.255
0.0.0.0–255.255.255.255
0.0.0.0–255.255.255.255
0.0.0.0–255.255.255.255
LAN
10:48
IPADDRESS1
192. 168. 1. 11
SUBNETMASK1
255. 255. 255. 1
GATEWAY1
192. 168. 1. 1
- 516 -
Setting meaning
First IP address
Subnet mask
Default gateway
Second IP address
Subnet mask
Default gateway
Third IP address
Subnet mask
Default gateway
1/6
+
+
+
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)
6F2S1931 (0.20)
Default value
192.l68.1.11
255.255.255.0
192.168.1.1
192.l68.1.11
255.255.255.0
192.168.1.1
192.l68.1.13
255.255.255.0
192.168.1.1
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grb200

Table of Contents