Toshiba GR200 Series Instruction Manual page 383

Centralized busbar protection ied
Hide thumbs Also See for GR200 Series:
Table of Contents

Advertisement

of group settings (e.g., the 'SYS_CHG' signal; which has been connected with the trigger#9
using the setting [Trigger ID9], as default; we have been discussed in Chapter
description: Group setting for protection functions
Screen information
7.2.3
Figure 7.2-5 illustrates the structure about the 'Event Recored1' group, which can be shown
the latest event#1 at the top structure (line ○
occurred for the event#1. Preceding event#2, event#3, etc. are shown below the event#1.
Similarly, the information about the 'Event Record2' and 'Event Record3' groups are displayed
on the IED screen.
†Note: For more information about the screen operation, see Chapter
Record sub-menu
Event Record1
10:48
#1
12:34:51.223
F.Record clear
On
#2
Screen scroll down
10:56:12.021
Set group change
4
#3
10:31:12.159
F.Record clear
On
#4
23:56:12.159
Figure 7.2-5 Event information grouped in the Event record1
Setup for the event recorder
7.2.4
Consider that GEN.TRIP command, which is denoted with Data ID '4F2A01 8B00011B6B',
should be sorted into the 'Event record1' group. The settings [End of E.Record-1]=256 and
[End of E.Record-2]=512 have been made as default; hence, we may select it with the
trigger#156 by setting the [Trigger ID156]= '4F2A01 8B00011B6B'. Set On-OFF for the [Trigger
Mode156], because the pulse-train of the trip command should be recorded along the pick-up
and drop-off times. Remember that the preferred name for the Trigger ID156 should be set
using the [Event Name156].
). The lines ○
b
.
1/4
2012-07-26
2012-07-25
2012-07-25
2012-07-23
- 369 -
.)
and ○
describes how an event
c
d
a
Event record1 list
b
The latest event#1
c Trigger inform ation
d
Trigger m ode inform ation
e
Event#2
f
Event#3
g
Event#4
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)
6F2S1931 (0.20)
Technical
User interface:

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grb200

Table of Contents