Displaying Details Of The Drive Objects - Siemens SINUMERIK 840D sl Commissioning Manual
Basesoftware and operating software
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Diagnostic manual (1054 pages)
Table of Contents
Advertisement
Service and diagnostics
18.12 Drive system
See also
Displaying details of the drive objects (Page 372)
18.12.2
Displaying details of the drive objects
Drive system diagnostics - details
The following information is displayed for the drive objects:
● Status display (r0002)
– The status display (parameter r0002) of the drive object is displayed.
● Missing enable signals (r0046)
– The enable signals are diagnosed except for the drive objects that do not have enable
● Commissioning parameter filter
– (p0009) – control unit
– (p0010) – further drive object
● Current fault
The alarm number of the actual drive object fault is displayed or "No fault present", when
no drive object fault is pending.
You obtain an overview of the pending faults with the following data in an additional
window:
– Alarm number
– Time: Date and time
– Alarm text
● Current warning
372
signals (e.g. Control Unit). Missing enables are shown in a pane below the displays.
The value of the "Device commissioning parameter filter" control unit parameter
(p0009) is displayed.
The value of the "Drive object commissioning parameter filter" parameter (p0010) is
displayed.
The number of the current drive object warning is displayed or "No warning present",
when no drive object warning is pending.
You obtain an overview of the pending alarms with the following data in an additional
window:
– Alarm number
– Time: Date and time
– Alarm text
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)
Advertisement
Chapters
Table of Contents
