Displaying And Editing Details Of The Zero Offsets - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Note
Activate settable zero offsets
The settable zero offsets must first be selected in the program before they have an impact.
4.8.5
Displaying and editing details of the zero offsets
For each zero offset, you can display and edit all data for all axes. You can also delete zero
offsets.
For every axis, values for the following data will be displayed:
● Coarse and fine offsets
● Rotation
● Scaling
● Mirroring
Note
Settings for rotation, scaling and mirroring are specified here and can only be changed here.
Tool details
You can display the following details for the tool and wear data for tools:
● TC
● Adapter dimension
● Length / length wear
● EC setup correction
● SC sum correction
● Total length
● Radius / radius wear
Turning
Operating Manual, 06/2019, A5E44903486B AB
Machine manufacturer
Please refer to the machine manufacturer's specifications.
You can also change the display of the tool correction values between the
Machine Coordinate System and the Workpiece Coordinate System.
Setting up the machine
4.8 Zero offsets
121
Advertisement
Table of Contents
