Siemens SINUMERIK 840D sl Commissioning Manual page 625

Basesoftware and operating software

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Introduction

"Run MyScreens" can be used to create user interfaces that display functional expansions

Preconfigured user interfaces supplied by Siemens or the machine manufacturer can be

modified or replaced.

Part programs, for example, can be edited on user interfaces created by users. Dialogs can

be created directly on the control system.

"Run MyScreens" is implemented with an interpreter and configuration files that describe the

user interfaces.

"Run MyScreens" is configured using ASCII files: These configuration files contain the

description of the user interface. The syntax that must be applied in creating these files is

described in the following chapters.

Basic configuration

The "Run MyScreens" function enables machine manufacturers to configure their own

dialogs. Even with the basic configuration, it is possible to configure 5 dialogs in the operator

menu tree or for customer-specific cycle dialogs.

Supplementary Conditions

The following conditions must be met:

● It is only possible to switch between dialogs within a single operating area.

● User, setting and machine data can be processed in the dialogs.

● User variables may not have the same names as system or PLC variables (also see List

● The dialogs activated by the PLC form a separate operating area (similar to measuring

SINUMERIK Integrate Run MyScreens (BE2)

Programming Manual, 03/2013, 6FC5397-1DP40-3BA1

Software option

To expand the number of dialogs, you require the following Software option:

"SINUMERIK Integrate Run MyScreens" (6FC5800-0AP64-0YB0)

Manual System Variables /PGAsl/).

cycle screens).

Chapters

Table of Contents

Sinumerik 840de sl