Siemens SINUMERIK 840D sl Commissioning Manual page 776
Basesoftware and operating software
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Diagnostic manual (1054 pages)
Table of Contents
Advertisement
Dialog selection
9.2 Dialog selection using PLC hard keys
[areaname_dialogname]
[AreaParameter_SlPaDialog]
100.screen1 = LS("Softkey1","param.com")
101.screen3 = LM("Screen
form1","param.com")
action.screen=Command
9.2
Dialog selection using PLC hard keys
Applications
The following functions can be initiated in the operating software by the PLC:
● Selecting an operating area
● Selecting certain scenarios within operating areas
● Executing functions configured at softkeys
Hard keys
All keys - also the PLC keys - are subsequently referred to as hard keys. A maximum of 254
hard keys can be defined. The following allocation applies:
Key number
Key 1 - key 9
Key 10 - key 49
Key 50 - key 254
Key 255
158
Key 50 – key 81
The first part of the name "areaname" refers to the operating
area and the second part "dialogname" designates the dialog
to which the commands configured in this section apply.
The names given in the systemconfiguration.ini file for the
operating area and dialog should be used. The dialog does not
have to be specified.
This is particularly true for operating areas which are only
implemented by means of a single dialog. Please refer to the
example on the left.
If "screen1" is displayed in the AreaParameter operating area
implemented by the SlPaDialog dialog, the
"LS("Softkey1","param.com")" command will be executed
when the "action" with the value 100 occurs.
Both the "action" and "screen" attributes clearly indicate when
the specified command will be executed.
The "screen" information is optional.
The following commands are permissible:
LM (LoadMask)
LS (LoadSoftkeys)
Application
Keys on the operator panel front
Reserved
PLC keys:
reserved for OEMs
Pre-assigned by control information.
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Integrate Run MyScreens (BE2)
Advertisement
Chapters
Table of Contents
