General settings
6.1
Changing the language
The operating software is available as standard in 6 languages.
Selecting a language
You can define the language selection mode using the following machine data.
MD9100 $MM_CHANGE_LANGUAGE_MODE
= 1
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
The user-interface language is specified via the "Language Selection" window (default
value).
1.
Select the "Start-up" operating area.
2.
Press the "Change language" softkey.
The small "Language Selection" window opens. The language most
recently set is highlighted.
3.
Switch the cursor to the required language.
4.
Press the <INPUT> key.
- OR -
Press the "OK" softkey.
The operating software switches to the language selected.
Language selection mode
6
51