Configuring Vnc Connections - Siemens SINUMERIK 840D sl Commissioning Manual
Basesoftware and operating software
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Diagnostic manual (1054 pages)
Table of Contents
Advertisement
Configuring operator panels
17.2 Configuring VNC connections
Update of the overview
When switching to the OPs window, a search for available operator controls is performed
automatically. This is also possible later via the Reload or Cancel cache softkey. The latter
action results in a completely new scan during which already available operator controls are
deleted from the local cache. New operator controls and data are sought during a reload.
The active DHCP server that contains the data for the operator panels can be a different
NCU, but also the local NCU itself. Irrespective of this, a copy of the data is stored and used
on the local NCU.
Procedure
17.2
Configuring VNC connections
A list of the available VNC connections is displayed in the lower part of the "Available
Operator Panels ..." window. It contains the following information:
Column
VNC server
Displacement
/Priority
302
1.
Select the "Start-up" operating area.
2.
Press the "OPs" softkey.
The "OPs" window is opened.
All the presently available operating elements are displayed.
3.
Press the "New display" softkey to refresh the overview.
A search is performed for new operator controls and data.
4.
Press the "Reload OP data" softkey to start a completely new search.
Already available operator controls are deleted from the buffer during
this search.
Description
Consecutive number to identify the VNC connection
IP address or name of the NC
Specifies whether it is possible that the TCU will be displaced by other nodes.
Displacement priority: Specifies the priority which influences whether the TCU will
be displaced by other nodes.
The possible values lie between 0 and 10. The smaller the value, the faster the TCU
will be displaced. If the displacement is blocked, the priority will be ignored.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)
Advertisement
Chapters
Table of Contents
