Configuring Operating Stations In The "Config.ini" File - Siemens SINUMERIK 840D sl Commissioning Manual
Basesoftware and operating software
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Diagnostic manual (1054 pages)
Table of Contents
Advertisement
Member<No>.Text = NCU730_K1
Member2.Target =
Member2.Text
5.5
Configuring operating stations in the "config.ini" file
The version of the channel menu is individually defined for the operator stations in the
"config.ini" files belonging to the station. The data defined in the "netnames.ini" file is used.
Here, the channel groups are assigned a softkey in the channel menu.
"config.ini" file
● The data is defined in section [T2M2N].
● The references CH_GRP_xx of the softkeys refer to the channel groups which are defined
● SKx in this case, designates the xth horizontal softkey in the channel menu.
Example
...
[T2M2N]
SK1=CH_GRP_1
SK2=CH_GRP_3
SK8=CH_GRP_15
"System Network Center" tool (SNC)
The operator stations can be configured in a transparent way using various windows with the
aid of the "SNC" tool.
Calling SNC
● For the NCU, the program is also included on the CompactFlash card and is called with
● For the PCU, the program is on the hard disk and can be started from the user interface
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
in the "netnames.ini" file. This notation is binding.
"sc start snc" using the service command.
using an icon.
5.5 Configuring operating stations in the "config.ini" file
;
Softkey text for the display in the
;
channel menu (vertical softkey). If, for
;
"Target" a channel number is specified,
;
then instead of a text, using the fixed
;
value "$MC_CHAN_NAME", it can also be
;
defined that the text to be displayed
;
should be the channel name defined in
;
the NCK machine data.
;
;
Same as for the vertical softkey 2
Channel menu
43
Advertisement
Chapters
Table of Contents
