Siemens SINUMERIK 840D sl Commissioning Manual page 99

Basesoftware and operating software

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Structure of the file

[Selected G-Groups]

SelectedGGroup1 = 1

SelectedGGroup2 = 2

SelectedGGroup3 = 3

SelectedGGroup4 = 4

SelectedGGroup5 = 5

SelectedGGroup6 = 6

SelectedGGroup7 = 7

SelectedGGroup8 = 8

SelectedGGroup9 = 9

SelectedGGroup10 = 11

SelectedGGroup12 = 12

SelectedGGroup13 = 13

SelectedGGroup14 = 14

SelectedGGroup15 = 15

SelectedGGroup16 = 16

[Selected G-Groups ISO-Mode]

... (as with section for Siemens)

1. Copy the "slmagcodeconfig.ini" file from the folder

2. Place the file in the following directory: /oem/sinumerik/hmi/cfg or /user/sinumerik/hmi/cfg.

3. Open the file and enter the number of the G code in question at the required position

SINUMERIK Operate (IM9)

Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1

/siemens/sinumerik/hmi/template/cfg.

As soon as the file is located in the user-specific directory, the entries for this file take

precedence over the Siemens file. If an entry is missing in a user-specific file, the

corresponding entry from the Siemens file is used instead.

SelectedGGroup1 =

I.e. the 5th G code group will be displayed at the 1st position.

Customizing the "Machine" operating area

8.3 Configuring the display of the G-code groups

Chapters

Table of Contents

Sinumerik 840de sl