Siemens SINUMERIK 840D sl Commissioning Manual page 968

Basesoftware and operating software

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Backing up and restoring data

4.1 Backing up and restoring data

Network settings

1. To connect the PCU to a programming device or PC, choose "Settings" in order to check or

reset the set IP addresses.

2. Select "Use Windows settings", to keep the factory defaults. (This is the default here as

3. Select "Use the following settings", to set a new configuration:

4. To activate a DNS name service, specify the server's IP address under "DNS Domain

Server" and the extension, e.g. "network.com" under "DNS Domain Suffix".

The default is ".local" if you don't enter anything else.

Changes to the network settings that you make here only become effective after you reboot

On the other hand, if you make changes to the network settings from service desktop, they

are immediately adopted.

Network settings

– With "Obtain an IP address automatically (DHCP)," you receive an automatically

assigned IP address from your DHCP server.

– With "Use the following IP address," you enter an IP address in the range of

192.168.214.250 – 254 using subnet screen form 255.255.255.0.

Commissioning Manual, 02/2012, 6FC5397-1DP40-3BA0

PCU-Basesoftware (IM8)

Chapters

Table of Contents

Sinumerik 840de sl