9.2
Configuring the simulation
Displaying machining operations
Turning technology
● Conventional turning with two geometry axes
● Three spindles: Main spindle, counterspindle, tool spindle
● Counterspindle slides, tailstock as NC axis
● B axis: Aligning turning tools in the tool spindle
Milling on turning machines
● Milling with geometry axes: TRANSMIT, TRACYL, TRAANG
Milling technology
● Milling with five axes: Swivel/TRAORI
● Swivel head change
Configuring the simulation
Set the turning or milling technology and the corresponding coordinate system in the channel
via the following channel-specific machine data:
Turning technology:
MD52200 $MCS_TECHNOLOGY
= 1
MD52000 $MCS_DISP_COORDINATE_SYSTEM
= 34 (example)
Milling technology:
MD52200 $MCS_TECHNOLOGY
= 2
MD52000 $MCS_DISP_COORDINATE_SYSTEM
= 0 (example)
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Turning technology
Milling technology
Simulation and simultaneous recording
9.2 Configuring the simulation
Technology
Position of the coordinate system
Technology
Position of the coordinate system
111