Wlan Security Ap-Radius-Authenticator Reauth-Mode - Siemens SIMATIC NET Configuration Manual
Industrial wireless lan to ieee 802.11n command line interface
Hide thumbs
Also See for SIMATIC NET:
- System manual (372 pages) ,
- Manual (300 pages) ,
- Operating instructions manual (90 pages)
Table of Contents
Advertisement
10.2.2.9
wlan security ap-radius-authenticator reauth-mode
Description
With this command, you specify who decides the time before the clients are forced to
reauthenticate.
Note
This command is available only in access point mode.
Requirement
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#
Syntax
Call up the command with the following parameters:
wlan security ap-radius-authenticator reauth-mode {show-modes | <mode>}
The parameters have the following meaning:
Parameters
show-modes
mode
Result
The function is configured.
Further notes
You display the setting with the
See also
wlan security ap-radius-authenticator reauth-interval (Page 398)
show wlan security ap-radius-authenticator (Access Point) (Page 389)
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
Lists the available values.
Method of time management
show wlan security ap-radius-authenticator
Security and authentication
Range of values / note
•
disabled
Function is disabled
•
server
Time management on the server
•
local
Local time management. You specify
the period of validity with the
curity ap-radius-authenticator
command.
reauth-interval
10.2 WLAN
wlan se-
command.
399
Hide quick links:
Advertisement
Table of Contents
