Show Ip Dns Cache; Show Ip Dns Name-Server - Siemens SIMATIC NET Configuration Manual
Industrial wireless lan to ieee 802.11n command line interface
Hide thumbs
Also See for SIMATIC NET:
- System manual (372 pages) ,
- Manual (300 pages) ,
- Operating instructions manual (90 pages)
Table of Contents
Advertisement
7.1.1.6
show ip dns cache
Description
This command shows the content of the DNS cache. The DNS cache buffers replies of the
DNS server for a brief time. This allows other queries for the same name to be replied to
directly without sending another query to the DNS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dns cache
Result
The content of the DNS cache is displayed.
7.1.1.7
show ip dns name-server
Description
This command shows information about the DNS servers configured on the device. The
table contains the index, the address type (e.g. IPv4) as well as the IP address and the
origin.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dns name-server
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
or
cli#
or
cli#
Network protocols
7.1 IPv4 protocol
285
Hide quick links:
Advertisement
Table of Contents
