Network structures
6.2 VLAN
6.2.4.1
name
Description
With this command, you assign a name to the VLAN.
Requirement
You are in the VLAN Configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
Syntax
Call up the command with the following parameters:
name <vlan-name>
The parameter has the following meaning:
Parameter
vlan-name
Result
The VLAN is assigned a name.
Further notes
You delete name assignment for a VLAN with the
6.2.4.2
no name
Description
With this command, you delete the name assignment for a VLAN.
Requirement
You are in the VLAN configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
236
Description
Name that will be assigned to the
VLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Range of values / note
max. 32 characters
command.
no name
Configuration Manual, 10/2015, C79000-G8976-C351-05