Siemens SINUMERIK 840D sl Function Manual page 576

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Detailed description

2.2 Mode groups

Global machine function for mode group

After mode selection, a machine function can be selected, which is then valid globally for the

whole mode group.

Within JOG mode

Within JOG mode, one of the following machine functions can be selected:

• REF (reference point approach)

• REPOS (repositioning)

Within MDA mode

Within MDA mode, one of the following machine functions can be selected:

• REF (reference point approach)

• REPOS (repositioning)

• TEACHIN (teach-in of axis positions)

TEACH IN, REPOS or REF

The selection of the machine function TEACH IN, REPOS or REF

from the operator interface is stored under:

NST DB11, ... DBX5.0 to DBX5.2 (strobe machine function)

The desired machine function TEACHIN, REPOS or REF

is activated under:

NST DB11, ... DBX1.0 to DBX1.2 (machine function)

The display of the active machine function TEACHIN, REPOS or REF can be seen in the:

NST DB11, ... DBX7.0 to DBX7.2 (active machine function)

/FB1/Function Manual, Basic Functions; Reference Point Approach (R1)

/BEMsl/ Operator's Guide HMI Embedded; Sec.: "Repositioning on contour with

controlled REPOS"

/FB1/ Function Manual, Basic Function; Reference Point Approach (R1)

/BEMsl/ Operator's Guide

/BEMsl/ Operating Instructions HMI Embedded and /BEM/ Operating Instructions HMI

Basic logic functions: Mode group, channel, program operation, reset response (K1)

Function Manual, 11/2006, 6FC5397-0BP10-2BA0

Show Quick Links

Chapters

Table of Contents