Siemens SINUMERIK 840D sl Function Manual page 110
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (1726 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Detailed description
2.2 Protection zones
Maximum number of protection areas
The maximum definable number of machine- and channel-related protection zones is set via:
MD18190 $MN_MM_NUM_PROTECT_AREA_NCK (Number of files for machine-related
protection zones)
MD28200 $MC_MM_NUM_PROTECT_AREA_CHAN (Number of files for channel-specific
protection zones)
Coordinates
The coordinates of a protection zone must always be programmed as absolute values with
respect to the reference point of the protection zone. When the protection zone is activated
via the part program it is possible to apply a relative offset to the reference point of the
protection zone.
Examples
In the following figures some examples for protection zones have been presented:
Figure 2-8
44
Example of application on turning machine
Basic logic functions: Axis monitoring, protection zones (A3)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
- Quick Links:
- Alarm Behavior
- Programming
- Machine Data
Hide quick links:
Advertisement
Chapters
Table of Contents
