Siemens SINUMERIK 840D sl Function Manual page 805
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (1726 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
RESET
The reset behavior of the changed geometry axis assignment is defined with the following
machine data:
MD20110 $MC_RESET_MODE_MASK (definition of initial control system settings after
RESET/TP-End)
MD20118 $MC_GEOAX_CHANGE_RESET (allow automatic geometry axis change)
MD20110 $MC_RESET_MODE_MASK
Bit
12
MD20118 $MC_GEOAX_CHANGE_RESET
Value
0
1
Program start
Analogously to the Reset response, the behavior during program start is based on the
setting in the machine data:
MD20112 $MC_START_MODE_MASK (definition of initial control system settings with NC-
START)
Bit
12
Basic logic functions: Axes, coordinate systems, frames (K2)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Value
Significance
0
In case of set machine data MD20118 $MC_GEOAX_CHANGE_RESET (allow
automatic geometry axis change) a changed geometry axis assignment is deleted
during reset or parts program end.
The initial setting defined in the machine data for the geometry axis assignment
becomes active.
1
A modified geometry axis assignment remains active after a reset/part-program end.
Significance
The current configuration of the geometry axes remains unchanged on reset and program
start. With this setting, the response is identical to older software versions without geometry
axis replacement.
The configuration of the geometry axis remains unchanged during reset or parts program
end as a function of machine data MD20110 $MC_RESET_MODE_MASK and during parts
program start as a function of machine data MD20112 $MC_START_MODE_MASK
(definition of initial control system settings with NC START) or brought to the initial status
defined in the machine data MD20050 $MC_AXCONF_GEOAX_ASSIGN_TAB (assignment
of geometry axis to channel axis).
Value
Significance
0
A modified geometry axis assignment remains active on part-program start.
1
A modified geometry axis assignment is cleared on part-program start.
Detailed description
2.1 Axes
21
- Quick Links:
- Alarm Behavior
- Programming
- Machine Data
Hide quick links:
Advertisement
Chapters
Table of Contents
