Table of Contents
Advertisement
6-1-6. Description on Setup Menu
A part of adjustments given in this section uses the setup
menu. The setup menu consists of the following menus.
Besides there is a TOP menu indicating the entire configu-
ration of menu items.
. USER menu
. USER MENU CUSTOMIZE menu
. OPERATION menu
. PAINT menu
. MAINTENANCE menu
. FILE menu
. DIAGNOSIS menu
For details on the setup menu, refer to Section 3 of the
Installation and Maintenance Manual.
In this manual, describes the setup menu operation as
follows.
For example:
When AUTO LEVEL in AUTO SETUP page of MAIN-
TENACE menu is performed:
MENU:
MAINTENANCE
PAGE:
AUTO SETUP
ITEM:
AUTO LEVEL
HDC-900/950 MM
How to change the setting values
To enter or cancel the setting value of items, which can be
changed by turning the MENU SELECT control (HDC-
900/910) or rotary encoder (HDC-950/930), proceed as
follows.
HDC-900/910
To enter the setting value:
Press the MENU SELECT switch toward the "EN-
TER" side.
To cancel the setting value:
Before pressing the MENU SELECT switch toward
the "ENTER" side, press the MENU SELECT switch
toward the "CANCEL" side. The original setting is
restored.
After pressing the MENU SELECT switch toward the
"ENTER" side, the setting cannot be canceled.
HDC-950/930
To enter the setting value:
Press the rotary encoder.
To cancel the setting value:
Before pressing the rotary encoder, press the MENU
switch toward the "CANCEL" side. The original
setting is restored.
After pressing the rotary encoder, the setting cannot be
canceled.
6-1. Preparations
6-5 (E)
Advertisement
Table of Contents
