Table of Contents
Advertisement
6-6. Video System Level Adjustment (When using MSU)
6-6-12. White Clip Level Adjustment
Equipment: Waveform monitor (R, G, B)
Test Point: HD SERIAL DIGITAL OUT connector
Preparations
. Setting for MSU-700A
MASTER GAIN → +12 dB
TEST1 button → ON (lit)
Adjustment Procedures
1. MSU menu operation:
. PAINT button → ON (lit)
. Touch panel operation
(Page 2/3) → [White|Clip]
Adjustment Item: R, G, B Master
Adjust the levels A for preferred
Specification:
level for R, G and B respectively.
In case of all levels for R, G and B
adjust simultaneously, adjust its
using the Master.
(Reference value: A = 756 mV)
Resetting after Adjustment
. MASTER GAIN/MSU-700A → 0 dB
. TEST1 button/MSU-700A → OFF (dark)
6-28 (E)
6-6-13. File Store
After adjustments described in Section 6-6 are complete,
be sure to execute the reference file store.
1. MSU menu operation:
. FILE button → ON (lit)
. Touch panel operation
[Reference] → [Ref|Store] → [Start]
2. When the store operation is complete, the message
"Completed" is displayed.
A
HDC-900/950 MM
Advertisement
Table of Contents
