Table of Contents
Advertisement
4-2. RP-114 Board
4-3. DR-412/492 Board
4-4. TG-214 Board
4-2. RP-114 Board
n
Every electrical part mounted on the RP-114 board cannot
be replaced. If there is any defective part, replace the board
itself.
1. Remove the CN-1961 board. (Refer to Section 4-1.)
2. Remove the four screws, and remove the RP-114 board.
RP-114 board
PS2 x 4
PS2 x 4
PS2 x 4
3. Install the new board in the reverse order of steps 1
and 2.
4-2 (E)
4-3. DR-412/492 Board
1. Remove the CN-1961 board. (Refer to Section 4-1.)
2. Remove the RP-114 board. (Refer to Section 4-2.)
3. Remove the three screws, and remove the DR-412/
492 board.
DR-412/492 board
4. Install the new board in the reverse order of steps 1 to
3.
4-4. TG-214 Board
1. Remove the CN-1961 board. (Refer to Section 4-1.)
2. Remove the RP-114 board. (Refer to Section 4-2.)
3. Remove the DR-412/492 board. (Refer to Section 4-3.)
4. Remove the TG-214 board in the arrow direction.
5. Install the new board in the reverse order of steps 1 to
4.
PS2 x 4
PS2 x 4
TG-214 board
HDC-900/950 MM
Advertisement
Table of Contents
