Table of Contents
Advertisement
5-2. TOP Menu
The TOP menu is provided for indicating the whole configuration of the menu items.
Displaying the TOP menu
HDC-900/910 : Set the DISPLAY switch from "OFF" to "MENU" while pressing the MENU SELECT
switch toward the "ENTER" side.
HDC-950/930 : Set the DISPLAY switch from "OFF" to "MENU" while pressing the rotary encoder.
[Reference]
[Reference]
[Reference]
[Reference]
[Reference]
To select the menu to be displayed on the viewfinder, switch setting on the AT-130 board is required.
For details, refer to "Selecting the Menu" in Section 5-1.
TOP MENU
<TOP MENU>
USER
USER MENU CUSTOMIZE
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
SERVICE
Menu
*
USER
*
USER MENU CUSTOMIZE
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
SERVICE
* : These menus are displayed only when the ROM version on the AT board of the unit is Ver 1.30 or higher.
HDC-900/950 MM
Description
You can select desired pages and items from the OPERATION,
PAINT, MAINTENANCE, FILE and DIAGNOSIS menu pages and set
them on the USER MENU CUSTOMIZE menu.
For details, refer to the operation manual supplied with this unit.
This menu is used for editting menu pages and items to be set on the
USER menu.
For details, refer to the operation manual supplied with this unit.
This menu consists of VF screen display items to be set by a camera
operator.
This menu consists of general paint operation items such as white.
This menu consists of paint items used less frequently such as
shading adjustment and items required for the maintenance of the
camera such as system change.
This menu is used for performing file operations such as saving the
reference file.
This menu describes the self-diagnosis and VTR status, etc.
This menu consists of the adjustments and settings required during
servicing such as RPN correction, etc.
5-2. TOP Menu
5-5 (E)
Advertisement
Table of Contents
