Table of Contents
Advertisement
3-8. Replacing the TRACKER Connector
1. Remove the AUDIO IN connector. (Refer to Section
3-12-2.)
2. Disconnect the connectors (CN3 and CN9) of CN-
1951 board.
3. Remove the three screws.
4. Disconnect the connectors (CN8, CN10, CN11, CN15,
CN17 and CN18) of CN-1951 board, and remove the
CN-1951 board.
CN18
PS2.6 x 4
CN15
CN10
CN8
CN-1951 board
HDC-900/950 MM
CN-1951 board
CN3
CN9
CN11
CN17
5. Remove the two screws, and remove the TRACKER
connector.
6. Remove the drop protection sheet from the TRACKER
connector.
TRACKER connecter
Drop protection
sheet
7. Install the new TRACKER connector in the reverse
order of steps 1 to 6.
3-8. Replacing the TRACKER Connector
Precision
K2.6 x 4
3-13 (E)
Advertisement
Table of Contents
