Table of Contents
Advertisement
1-4. Description of CCD Block Number
Every CCD unit has its own ID number called CCD block
number. It shows the CCD block type and serial number
for the CCD block.
The CCD block number label is put in the CCD unit.
Example : AOA xxxxx
Serial number for the CCD unit
CCD block type
Model
CCD block type
HDC-900
AOE
HDC-950
HDC-910
ATA
HDC-930
To replacing the CCD unit, refer to Section 2-1 (HDC-900/
910) or Section 3-1 (HDC-950/930).
HDC-900/950 MM
1-5. Notes on Flexible Card Wire
1-5-1. Disconnecting/Connecting Flexible
Card Wire
The flexible card wires are used between the boards of
HDC-900/910 and HDC-950/930. Take care not to bend
forcedly these flexible card wires. This shortens the wire
life.
HDC-900/910
Between CN-1974 and AT-131
Between CN-1961 and DR-412/492
Between CN-1961 and PA-239
HDC-950/930
Between CN-1961 and DR-412/492
Between CN-1961 and PA-239
Between MB-882 and CN-2018
Between MB-882 and CN-1951
Between MB-882 and SW-1017
Disconnectiong
1. Trn off the power.
2. Slide portions A in the direction of the arrow to unlock
and pull out the flexible card wire.
Connecting
m
. Be careful not to insert the flexible card wire obliquely.
. Check that the conducive surface of the flexible card
wire is not soiled with dust.
1. Slide portions A in the direction of the arraw and insert
the flexible card wire as far as it will go with the
conductive serface down.
2. Slide portions A in the reverse direction to lock.
A
1-4. Description of CCD Block Number
1-5. Notes on Flexible Card Wire
A
Conductive
surface
1-7 (E)
Advertisement
Table of Contents
