Table of Contents
Advertisement
Simple Network Management Protocol (SNMP)
(5) snmp sys location <name>
Sets SNMP sysLocation. The maximum length is
24 characters.
This command is resumed.
(6) snmp comm list
Displays the SNMP community name.
(7) snmp comm add <name> [ro/wo/rw]
[enable_trap/disable_trap]
Adds an SNMP community name. The maximum
length is 24 characters.
ro/wo/rw means Read-Only/Write-Only/Read-
Write.
Traps are controlled by enable_trap/disable_trap.
SNMP community name allows up to 5 names.
This command is resumed.
(8) snmp comm clear <name>
Clears the SNMP community name.
This command is resumed.
(9) snmp host list
Displays the SNMP host (manager).
(10) snmp host add <name> <community> ip_addr
Relates the SNMP host name to a community and
sets its IP address.
The maximum length is 24 characters.
The SNMP host allows up to 5 hosts.
This command is resumed.
(11) snmp host clear <name> <community> ip_addr
Clears the SNMP host.
This command is resumed.
(12) snmp trap list
Displays the SNMP trap setting status.
(13) snmp trap switch [enable_all/enable_select/
disable_all]
Sets SNMP traps.
• enable_all: Enable all traps.
• enable_select: Enable selected traps only.
• disable_all: Disable all trap.
This command is resumed.
(14) snmp trap select warning [enable/disable]
Sets/Unsets MSB-2000/MSBA-20IP warnings as
a trap.
This command is available when the trap switch is
set to enable_select.
This command is resumed.
(15) snmp trap select clear_warning [enable/
disable]
Sets whether or not to output a clear warning trap.
This command is resumed.
If the argument is omitted, the error message
"invalid parameter" is returned.
(16) snmp trap select minor [enable/disable]
Sets/Unsets MSB-2000/MSBA-20IP minor errprs
as a trap.
This command is available when the trap switch is
set to enable_select.
This command is resumed.
(17) snmp trap select clear_minor [enable/disable]
Sets whether or not to output a clear minor error
trap.
This command is resumed.
If the argument is omitted, the error message
"invalid parameter" is returned.
(18) snmp trap select major [enable/disable]
Sets/Unsets MSB-2000/MSBA-20IP major errors
as a trap.
This command is available when the trap switch is
set to enable_select.
This command is resumed.
(19) snmp trap select clear_major [enable/disable]
Sets whether or not to output a clear major error
trap.
This command is resumed.
If the argument is omitted, the error message
"invalid parameter" is returned.
(20) snmp trap select critical [enable/disable]
Sets/Unsets MSB-2000/MSBA-20IP critical errors
as a trap.
This command is available when the trap switch is
set to enable_select.
This command is resumed.
91
Advertisement
Table of Contents
