Table of Contents
Advertisement
List of Menus
Item number Category
T015
status
T016
status
T017
status
T018
status
T019
status
T020
status
T021
status
T022
status
Item
Arguments
lpcm_pid
–
lpcm_channel
–
lpcm_word_len
–
lpcm_avail_ch
–
mpeg_ch12_mode
–
mpeg_ch12_rate
–
mpeg_ch34_mode
–
mpeg_ch34_rate
–
Function
Outputs the PID of the first LPCM audio
stream in the PAT from the TS stream
audio stream during selection/decoding in
asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx (cm)
mode.
In any other mode or when there is no
input TS stream, outputs "--------" signifying
that this is invalid.
If the value is not within the tolerance of
the MSB specification, "not accepted." is
appended to the output.
Permitted values: 0x10≤num≤0x1ffe
In asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx (cm)
mode, when an LPCM audio stream is
being selected/decoded, shows the
lpcm_channel being decoded.
Depending on the input, "1-2", "3-4", "1-4",
or "1-8" is output.
In cases other than this, outputs "--------"
signifying that this is invalid.
In asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx (cm)
mode, when an LPCM audio stream is
being selected/decoded, shows the word
length of the lpcm audio stream being
decoded.
Depending on the input, "16", "20", or "24"
is output.
In cases other than this, outputs "--------"
signifying that this is invalid.
In asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx (cm)
mode, when an LPCM audio stream is
being selected/decoded, shows in bitmap
fashion which channels of LPCM are
present or absent.
If channels 1/2: "12------"
If channels 3/4: "--34----"
If channels 1-4: "1234----"
In cases other than this, outputs "--------"
signifying that this is invalid.
In asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx (cm)
mode, when decoding an MPEG audio
stream corresponding to MPEG_ch12,
outputs the mode of the stream.
The output value is "single" "dual" "stereo",
or "joint stereo".
In cases other than this, outputs "--------"
signifying that this is invalid.
In asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx (cm)
mode, when decoding an MPEG audio
stream corresponding to MPEG_ch12,
outputs the bit rate of the stream. (The last
status is latched, and output.)
The output value is "96kbps" "112kbps"
"128 kbps" "160kbps" "192kbps" "224kbps"
"256 kbps" "320kbps" or "384kbps".
In cases other than this, outputs "--------"
signifying that this is invalid.
Similar to T019, outputs the mpeg_ch34
mode.
Similar to T020, outputs the mpeg_ch34
bitrate.
78
Advertisement
Table of Contents
