List of Menus
(In asi_to_sdi mode)
Item number Category
C141*
setup
C142*
setup
C143*
setup
C144*
setup
C145*
setup
C146*
setup
C998
setup
C999
setup
–
setup
Note
"C141" to "C146" are commands for outputting
DVB-ASI user data to UDP port (option functions),
but are not currently supported.
Item
Arguments
rx_udata1
off
on
dst_udata1_port
05000 to 09000 to 65535 Sets the UDP port No. for outputting user
dst_udata1_ip
000 to 192 to 255.
000 to 168 to 255.
000 to 001 to 255.
000 to 003 to 255
rx_udata2
off
on
dst_udata2_port
05000 to 09001 to 65535 Sets the UDP port No. for outputting user
dst_udata2_ip
000 to 192 to 255.
000 to 168 to 255.
000 to 001 to 255.
000 to 003 to 255
cancel
–
init
–
list
–
Function
Disables user data1 output from the UDP
port, via the MSBA-20IP.
Enables user data1 output from the UDP
port, via the MSBA-20IP.
data1 from the MSBA-20IP.
Sets the destination IP address for output
of user data1 from the MSBA-20IP.
Disables user data 2 output from the UDP
port, via the MSBA-20IP.
Enables user data 2 output from the UDP
port, via the MSBA-20IP.
data 2 from the MSBA-20IP.
Sets the destination IP address for output
of user data 2 from the MSBA-20IP.
Cancels a setup change before execution.
Returns setup items to their factory default
settings.
Displays the list set in setup.
This is a special-purpose command for
RS232C/telnet operation.
56