Table of Contents
Advertisement
List of Menus
In tx-rx mode
(
)
Item number Category
C101
setup (Rx)
C102
setup (Rx)
C111
setup (Tx)
C112*
setup (Tx)
C113
setup (Tx)
C114
setup (Tx)
C115
setup (Tx)
C116*
setup (Tx)
C117*
setup (Tx)
C118*
setup (Tx)
C119*
setup (Tx)
C120*
setup (Tx)
C121
setup (Tx)
C124*
setup (Tx)
C125*
setup (Tx)
C126*
setup (Tx)
C127*
setup (Tx)
Item
Arguments
rx_program_no
00001 to 00200 to 65535 Specifies program number for decoding.
rx_packet_size
auto
188
204
pri_pid_base
0x0010 to 00c0 to 1ff7
tx_umid
off
on
tx_line_data1
off
on
tx_line_data2
off
on
tx_line_base
12 to 21
tx_vanc_data
off
on
tx_vanc1_did
0x 00 to ff
tx_vanc1_sdid
0x 00 to ff
tx_vanc2_did
0x 00 to ff
tx_vanc2_sdid
0x 00 to ff
tx_vitc_data
off
on
tx_udata1
off
on
tx_udata1_port
05000 to 09000 to 65535 Sets the UDP port No. for picking up user
tx_udata1_rate
1 to 30
tx_udata2
off
on
Function
Automatically recognizes input TS packet
size.
Sets input TS packet size to fixed 188 bytes.
Sets input TS packet size to fixed 204 bytes.
Specifies the base PID for transferring
private data.
Disables UMID.
Enables UMID. PID is "pri_pid_base" +0.
Disables uncompressed line data
processing of 1st line.
Enables uncompressed line data
processing of 1st line.
PID is "pri_pid_base" +1.
Disables uncompressed line data
processing of 2nd line.
Enables uncompressed line data
processing of 2nd line.
PID is "pri_pid_base" +1.
Specifies the line number of the
uncompressed line. This line and the
following line can be transferred as
uncompressed lines.
Disables ancillary data processing in the
vertical blanking interval.
Enables ancillary data processing in the
vertical blanking interval. PID is
"pri_pid_base" +2.
Specifies the DID for vertical blanking
interval ancillary data.
Specifies the SDID for vertical blanking
interval ancillary data.
Specifies the DID for vertical blanking
interval ancillary data.
Specifies the SDID for vertical blanking
interval ancillary data.
Disables VITC private data transfer.
Enables VITC private data transfer.
PID is "pri_pid_base" +3.
Disables getting user data1 from the UDP
port, via the MSBA-20IP.
Enables getting user data1 from the UDP
port, via the MSBA-20IP.
PID is "pri_pid_base" +6.
data1 from the MSBA-20IP.
Specifies rate for getting user data1 from
the MSBA-20IP.
Unit: Mbps
Disables getting user data 2 from the UDP
port, via the MSBA-20IP.
Enables getting user data 2 from the UDP
port, via the MSBA-20IP.
PID is "pri_pid_base" +7.
42
Advertisement
Table of Contents
