Table of Contents
Advertisement
Simple Network Management Protocol (SNMP)
Details of Private MIB status information
(3.1.1.1) proV1MSBstatusIndex (Read-Only)
Index
1
(3.1.1.2) proV1MSBstatusTsRate (Read-Only)
TS Rate
Displays the actually measured value of the input TS
rate.
This status is valid for "asi_to_sdi/asi_to_sdti-cp/tx-rx/
tx-rx (cm)" mode.
For the other modes or for the state of "asi absent,"
displays "--------" meaning "invalid."
(3.1.1.3) proV1MSBstatusProgramList (Read-
Only)
Program List
Displays a list of program numbers written in the input
TS stream PAT.
This status is valid for "asi_to_sdi/asi_to_sdti-cp/tx-rx/
tx-rx (cm)" mode.
For any other mode or for the state of "asi absent,"
displays "--------" meaning "invalid."
When a value outside the range supported by this unit
is output, the message "not accepted" is added.
The allowable value range is: 1≤num≤65535.
The maximum number of programs that can be
displayed is 12. They are displayed being separated by
" " (hexadecimal 0x20).
(3.1.1.4) proV1MSBstatusRxProgramNo (Read-
Only)
Rx Program Number
Displays the selected program number for "asi_to_sdi/
asi_to_sdti-cp/tx-rx/tx-rx (cm)" mode.
For any other mode or for the state of "asi absent,"
displays "--------" meaning "invalid."
When a value outside the range supported by this unit
is output, the message "not accepted" is added.
The allowable value range is: 1≤num≤65535.
(3.1.1.5) proV1MSBstatusPmtPid (Read-Only)
PMT PID
Displays the selected PMT PID written in the TS
stream PAT for "asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx
(cm)" mode.
For any other mode or for the state of "asi absent,"
displays "--------" meaning "invalid."
When a value outside the range supported by this unit
is output, the message "not accepted" is added.
The allowable value range is: 0x10≤num≤0x1ffe.
(3.1.1.6) proV1MSBstatusPcrPid (Read-Only)
PCR PID
Displays the selected PCR PID written in the TS
stream PAT for "asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx
(cm)" mode.
For any other mode or for the state of "asi absent,"
displays "--------" meaning "invalid."
When a value outside the range support by this unit is
output, the message "not accepted" is added.
The allowable value range is: 0x10≤num≤0x1ffe.
(3.1.1.7) proV1MSBstatusVideoPid (Read-
Only)
Video PID
Displays the video PID of the TS stream being
decoded for "asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx
(cm)" mode.
For any other mode or for the state of "asi absent,"
displays "--------" meaning "invalid."
When a value outside the range supported by this unit
is output, the message "not accepted" is added.
The allowable value range is: 0x10≤num≤0x1ffe.
(3.1.1.8) proV1MSBstatusMpegCh12Pid (Read-
Only)
MPEG CH12 PID
Displays the first MPEG audio stream PID of the TS
stream being decoded for "asi_to_sdi/asi_to_sdti-cp/
tx-rx/tx-rx (cm)" mode.
For any other mode or for the state of "asi absent,"
displays "--------" meaning "invalid."
When a value outside the range supported by this unit
is output, the message "not accepted" is added.
The allowable value range is: 0x10≤num≤0x1ffe.
(3.1.1.9) proV1MSBstatusMpegCh34Pid (Read-
Only)
MPEG CH34 PID
See "(3.1.7) mpegCh12Pid (Read-Only)" above.
(3.1.1.10) proV1MSBstatusLpcmPid (Read-
Only)
LPCM PID
Displays the first LPCM audio stream PID of the TS
stream being decoded for "asi_to_sdi/asi_to_sdti-cp/
tx-rx/tx-rx (cm)" mode.
For any other mode or for the state of "asi absent,"
displays "--------" meaning "invalid."
When a value outside the range supported by this unit
is output, the message "not accepted" is added.
The allowable value range is: 0x10≤num≤0x1ffe.
102
Advertisement
Table of Contents
