Table of Contents
Advertisement
Overview
Related Products
BDX-D1000 MPEG Decoder Unit
BDX-N1000 ATM Network Interface Unit
Notes on Use
Use this unit within the following limitations:
• The bit rate for video data the MSB-2000 can encode
or decode is 15 Mbps at maximum with MPEG 2
MP@ML and 50 Mbps at maximum with MPEG 2
4:2:2P@ML. Note, however, that ts_rate is 35 Mbps
or less with MSBA-20IP.
• Note that performance cannot be guaranteed if there
is a large amount of jitter on the input signal.
• When using the MSBA-20IP for MPEG stream
transfer, transfer bandwidth must be ensured, for
example by setting the VLAN (Virtual LAN) on the
LAN Switch side.
• When using this unit with video_encmode set to
"LD", and connected to a BDX-D1000, set
seq_hdr_cycle to "interstitial", and use the factory
default settings for pat_interval, pmt_interval, and
pcr_interval.
6
Advertisement
Table of Contents
