1
Loosen four screws of the front cover.
Since the screws are of falling prevention type, they do
not come off the front cover even if loosened.
2
Hold the both side of the front cover and pull it slightly
2
downward.
The inserted part of the upper side of the front cover
comes off.
The tab shown in the figure on the right also come off.
3
Pull the front cover toward you and remove it from the
unit.
9
4
Check that the charge lamp is on/off.
5
Mount the front cover in the reverse procedure.
Pay attention to engagement of the tab and insertion of the upper side of the cover.
2. Installation and wiring
Charge lamp
2-22
E6582062
Front cover
Insertion
Tab