Basic Setting Methods Of Parameters - Toshiba TOSVERT VF-AS3 Instruction Manual
High-performance industrial inverter for 3-phase motors, 3-phase 240v class 0.4 to 55kw, 3-phase 480v class 0.4 to 280kw
Hide thumbs
Also See for TOSVERT VF-AS3:
- Instruction manual (599 pages) ,
- Manual (69 pages) ,
- Quick start manual (68 pages)
Table of Contents
Advertisement
Memo
• For how to switch other operation method to panel run, refer to [4. 3], [5. 2. 1].
■ Terminal run
The motor is operated with an external signal.
Run/stop the motor with an ON/OFF signal to a digital input terminal. Also, input the frequency
command with potentiometer/voltage/current signals to analog input terminals.
Memo
• For how to switch other operation methods to terminal run, refer to [4. 4], [5. 2. 1].
■ Communication run
The motor can be operated with an RS485 communication or Ethernet. Connect cables to RS485
communication connector 1 and 2 for the RS485 communication or to Ethernet connector 1 and 2
for the Ethernet communication. By inserting cassette options (PROFINET, etc.) to optional slots A,
other communication run is also made possible.
For details, refer to "Communication Function Instruction Manual" (E6582143).
4. 2
Basic setting methods of parameters
This inverter has four kinds of display modes as described in [3. 1. 2]. Switch to [Setting mode] (or [Easy
mode]) and set parameters.
On the setting screen of a parameter, the title, name, and setting value of the parameter are displayed.
Each parameter has a 4-digit communication number assigned separately from the title.
4. 2. 1
[Setting mode] and [Easy mode]
Two parameter setting methods are provided.
[Easy mode]
• Only ten basic parameters most frequently used are displayed.
• Up to 32 parameters can be registered to be displayed.
• To set parameters not displayed in [Easy mode], set to [Setting mode] to read them out.
• Since parameters registered in [Easy mode] are directly displayed on the [Easy mode] screen, you
can check or change them easily.
[Setting mode]
• This is a mode to set parameters of the inverter.
• All the basic parameters, extended parameters, and other parameters are displayed.
4-3
4. [Basic operation] Operation methods of motor
E6582062
3
4
9
- Quick Links:
- Installation and Wiring
- Wiring
Hide quick links:
Advertisement
Table of Contents
