Toshiba TOSVERT VF-AS3 Instruction Manual page 418

High-performance industrial inverter for 3-phase motors, 3-phase 240v class 0.4 to 55kw, 3-phase 480v class 0.4 to 280kw

Hide thumbs Also See for TOSVERT VF-AS3:

Table of Contents

6. 34. 10 Setting torque command value in panel run

<F725: Panel torque command>

This parameter is used to set a torque command value when torque control is performed in panel

■ Parameter setting

■ Guideline for the setting

<F725: Panel torque command> is enabled only when <F420: Torque command select> is "12" and

acts as command value(%).

For details, refer to torque control (E6582106).

6. [Advanced] How to use parameters

Parameter name

Panel torque command

• How to operate the operation panel -> Refer to [3. 1. 1].

• How to switch display mode on the operation panel -> Refer to [3. 1. 2].

• Procedure to change parameter setting -> Refer to [4. 2. 3]

• Details on operation by external signals -> Refer to [Chapter 7].

F725 : Panel torque command

Adjustment range

-250 to +250

Default setting

Show Quick Links

Table of Contents