7. 2
You can assign the functions to the digital input terminals. The assigned functions can be switched for
operation.
Also, you can assign the functions to the digital output terminals and the relay logic output terminals to
output signals to external equipment.
For the digital terminals, sink logic and source logic can be switched with the slide switch [SW1]. For
details, refer to [2. 3. 5].
7. 2. 1
Signals are input to the digital input terminals from an external programmable controller. The signals
4
are used for operating the inverter and switching the functions.
The digital input terminal functions can be selected from a variety of functions, thus allowing flexible
4
compatibility with system design.
■ Configuration of the control terminal block
4
7
9
■ Function setting for the digital input terminals
Terminal
symbol
F
R
7. Operating using external signals
Applied operation by I/O signals
Setting the functions to the input terminals
(for sink logic)
Title
F111
Terminal F function 1
F151
Terminal F function 2
F155
Terminal F function 3
F112
Terminal R function 1
F152
Terminal R function 2
F156
Terminal R function 3
Parameter name
7-2
E6582062
Adjustment range
2
*1
0 - 203
0
0
4
*1
0 - 203
0
0
Default
setting