Toshiba TOSVERT VF-AS3 Instruction Manual page 45

High-performance industrial inverter for 3-phase motors, 3-phase 240v class 0.4 to 55kw, 3-phase 480v class 0.4 to 280kw

Hide thumbs Also See for TOSVERT VF-AS3:

Table of Contents

With frame size A1, A2, or A3

VFAS3-2004P to 2075P, VFAS3-4004PC to 4185PC

The parts to be removed are as follows.

• Front cover on the lower side of the front surface

• Top cover on the top surface (resin)

Each cover can be removed separately.

■ Front cover

Loosen four screws of the front cover.

Since the screws are of falling prevention type, they do not

come off the front cover even if loosened.

Hold the both side of the front cover and pull it slightly down-

The inserted part of the upper side of the front cover comes

The tab shown in the figure on the right also come off.

Pull the front cover toward you and remove it from the unit.

Mount the front cover in the reverse procedure.

Pay attention to engagement of the tab and insertion of the

upper side of the cover.

2. Installation and wiring

Show Quick Links

Table of Contents