Protective Conductor Connection And Shield Support; Technical Data - Siemens SINAMICS S120 Manual
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
7.3.6
Protective conductor connection and shield support
The following diagram shows a typical Weidmüller shield connection clamp for the shield
supports.
1
①
②
Figure 7-4
NOTICE
Damage or faulty operation due to incorrect shielding or inadmissible cable lengths
If the correct shielding procedures or the permissible cable lengths are not observed, it can
cause damage or the machine may malfunction.
• Only use shielded cables.
• Do not exceed the cable lengths stated in the technical data.
7.3.7
Technical data
Table 7-5
6SL3055-0AA00-6AA1
Electronics power supply
Voltage
Current (without DRIVE-CLiQ node)
Power loss
Maximum cable length
Protective ground conductor connection
Ventilation clearances, above/below
Weight
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
2
Shield connection terminal, Weidmüller company, type: KLBUE CO1, Article number:
1753311001
Protective conductor connection M4 / 1.8 Nm (15.9 lbf in)
Protective conductor connection and shield support
Technical data of the DMC20
7.3 DRIVE-CLiQ Hub Module DMC20
Unit
V
DC
A
DC
W
m
At the housing with M4 screw
mm
kg
Hub Modules
Value
DC 24 (20.4 ... 28.8)
≤0.2
≤4
30
50
0.36
205
Advertisement
Table of Contents
