7.3.4
Dimension drawing
Figure 7-2
7.3.5
Installation
Installation
1. Tilt the component backwards slightly and attach it to the DIN rail using the hooks.
2. Swivel the component onto the DIN rail until you hear the mounting slide at the rear latch
into position.
3. Slide the component along the mounting rail to either the left or the right into its final
position.
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
30 (1.18)
Dimension drawing of the DRIVE-CLiQ Hub Module DMC20, all data in mm and (inches)
Hub Modules
7.3 DRIVE-CLiQ Hub Module DMC20
105 (4.13)
110 (4.33)
203