X500/X501 Drive-Cliq Interfaces; X524 Electronics Power Supply - Siemens SINAMICS S120 Manual
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
6.8.2.2
X500/X501 DRIVE-CLiQ interfaces
Table 6-55
Connector
type
The blanking covers for the DRIVE-CLiQ interfaces are included in the scope of delivery.
Blanking covers (50 units), article number: 6SL3066-4CA00-0AA0
Note
The maximum DRIVE-CLiQ cable length is 100 m.
6.8.2.3
X524 Electronics power supply
Table 6-56
Type: Spring-loaded terminal 6 (Page 320)
The maximum cable length is 30 m.
Note
The two "+" and "M" terminals are jumpered in the connector. This ensures that the supply
voltage is looped through.
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
X500/X501: DRIVE-CLiQ interfaces
Pin
Signal name
1
TXP
2
TXN
3
RXP
4
Reserved, do not use
5
Reserved, do not use
6
RXN
7
Reserved, do not use
8
Reserved, do not use
A
+ (24 V)
B
M (0 V)
DRIVE-CLiQ socket
X524 electronics power supply
Terminal Designation
+
Electronics power supply (24 V)
+
Electronics power supply (24 V)
M
Electronics ground (0 V)
M
Electronics ground (0 V)
Terminal Modules
6.8 Terminal Module TM150
Technical data
Transmit data +
Transmit data -
Receive data +
-
-
Receive data -
-
-
Power supply, max. 450 mA
Electronics ground
Technical data
Voltage: 24 V DC (20.4 ... 28.8 V)
Current consumption (max.): 0.5 A
(including DRIVE-CLiQ)
Max. current via the jumper in the con‐
nector: 20 A (15 A according to UL/CSA)
189
Advertisement
Table of Contents
