Terminal Modules
6.7 Terminal Module TM120
6.7.5
Dimension drawing
Figure 6-26
6.7.6
Installation
Installation
1. Tilt the component backwards slightly and attach it to the DIN rail using the hooks.
2. Swivel the component onto the DIN rail until you hear the mounting slide at the rear latch
into position.
3. Slide the component along the mounting rail to either the left or the right into its final
position.
184
30
(1.18)
Dimension drawing of Terminal Module TM120, all data in mm and (inches)
105 (4.13)
111 (4.37)
130 (5.12)
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2