Table of Contents
Advertisement
System Controller Installation
This chapter provides system controller and accessories installation information for the HP
4062UX/F system. The HP 4062UX/F system includes a system controller as follows:
HP 9000 Series 300 Model 360, 370, 375, 380, 382, or R/382; Model 340, or 345 for diskless
cluster con guration.
HP 9000 Series 700 Model 745i, 747i, and 725.
For more information on each computer or supported computer, contact your nearest HP
Sales Oce.
The following accessories are installed in your system controller, depending on the system
con guration:
Series 300 computers
HP 98568A, HP 98568A option 132, or HP 98570A Backplane Expander.
HP A2246A DIO-I Bus Expander
HP 98267A/B/C, 98264A/B, 98258A/B/C, 98257A, or 98256A RAM Card(s).
HP 98624A HP-IB Interface Card.
Speci c combinations of these items may be included, depending on the HP 4062UX/F
1
software con guration and memory requirements.
Additional accessories cannot be installed into model 340 or 345 computers because
2
these computer models do not contain enough mechanical or electrical provisions for
additional device I/O (DIO) or DIO II interfaces.
Series 700 computers
For instrument control
Series 745i/747i Internal HP-IB Interface Card
HP E2071B High Performance HP-IB Interface Card
For peripheral control
HP 25560A EISA HP-IB Interface Card
For complete controller and accessory installation information, refer to the
and
Reference
Notes
The HP 4062UX/F system requires an HP 46084A ID Module for system software security.
Installing the HP 46084A is described in this chapter.
You can install your system controller in standard system cabinet (1600 mm height) with rack
mount kits. Installing the system controller in the system cabinet is described in this chapter.
2
for each item.
1
Installation
System Controller Installation 2-1
2
1
Advertisement
Table of Contents
