Table of Contents
Advertisement
<
>
irq
series 700 internal HP-IB interface
The syntax for the series 700 internal card:
<lu><symname><cardname><location>[card specific values]
You can change only
<
>
lu
<
>
symname
6. Perform
postcustomize
1. Perform the
postcustomize
# /usr/pcs/etc/postcustomize
2. When \
Continue [Y/N]
If your system is in a diskless cluster, perform this step for server and each diskless
cnode.
This command automatically customizes the following les.
/etc/pro le
/etc/csh.login
/usr/vue/con g/Xsession
/usr/lib/rmb/rmbrc
/usr/lib/X11/app-defaults/Rmb
For series 300 computers, this command also rebuilds the HP-UX kernel for HP
BASIC/UX.
7. If your controller is a series 300 computer, reboot your HP-UX system.
If your controller is a series 700 computer, skip this step.
Enter as follows:
# shutdown -r 0
8. Perform
pilconf
If your controller is a series 300 computer, skip this step.
Type as follows:
# /usr/pil/bin/pilconf
Press
key for the rst to third displayed messages. Type \
4 Return 5
that asks if you want to reboot your system.
For details of the
pilconf
9. Customize X Window environment.
5-10 Software Installation
The legal IRQ line choises for the E2071 are: 3, 5, 7, 9, 10, 11, 12, 15.
<
>
<
lu
and
symname
Logical unit number of the card. Set to the following value.
25: for prober control
27: for HP 4062 control
A symbolic name for your card. Set a desired name.
command to customize some les automatically.
command as follows:
)
" is displayed, enter \
command to nish HP SICL con guration and build a new kernel.
command, see
>
parameters:
".
Y
Installing and Maintaining HP BASIC/UX
" for the last message
y
.
Advertisement
Table of Contents
