Advertisement
Note: The Common control (CMNCTRL) function can test and check the operation-
7
direction of logic. When the user sets Off for scheme switch [SCDEN], operation of
the logic is blocked if the logic is running in the same operation-direction
compared with the previous operation-direction. Alternatively, if On is set for the
scheme switch, the logic is not blocked.
Note: The user must program the PLC logic "Control hierarchy condition". The user
8
must connect the "Control hierarchy condition" to the select condition logic using
the connection point "DPOS01IN_TMP_28". For more information, see Chapter
Control and monitoring application: Control hierarchy
Table 4.2-6.Note that the logic outputs are generated separately for both On and
Off.
Signal name and number
(viii)
Note: The user should note the meaning of the following descriptions as shown in
column "M/O" of each table:
"O" indicates that the signal is provided for optional use.
"M" indicated that the user should map/set/configure the signal; otherwise, the
"N/A" indicates that that the user cannot change the state of the signal.
Table 4.2-13 PLC connection points (Input point for PLC#1 User configurable condition)
Signal Number
Signal Name
512001 810301EE57
DPOS01IN_TMP_35
512001 810302EE57
DPOS01IN_TMP_35
512001 810303EE57
DPOS01IN_TMP_35
....
....
512001 810348EE57
DPOS72IN_TMP_35
Table 4.2-14 PLC connection points (Input point for PLC#2 User configurable condition)
Signal Number
Signal Name
512001 820301EE5E
DPOS01IN_TMP_42
512001 820302EE5E
DPOS02IN_TMP_42
512001 820303EE5E
DPOS03IN_TMP_42
...
...
512001 820348EE5E
DPOS72IN_TMP_42
Table 4.2-15 PLC connection points (Input point for PLC#3 User configurable condition)
Signal Number
Signal Name
512001 800301EE53
DPOS01IN_TMP_34
512001 800302EE53
DPOS02IN_TMP_34
512001 800303EE53
DPOS03IN_TMP_34
...
...
512001 800348EE53
DPOS72IN_TMP_34
user experience an operational failure if the default settings are used.
Description
DPOS01 user configurable condition(PLC#1)
DPOS02 user configurable condition(PLC#1)
DPOS03 user configurable condition(PLC#1)
.....
DPOS72 user configurable condition(PLC#1)
Description
DPOS01 user configurable condition(PLC#2)
DPOS02 user configurable condition(PLC#2)
DPOS03 user configurable condition(PLC#2)
...
DPOS72 user configurable condition(PLC#2)
Description
DPOS01 user configurable condition(PLC#3)
DPOS02 user configurable condition(PLC#3)
DPOS03 user configurable condition(PLC#3)
...
DPOS72 user configurable condition(PLC#3)
- 524 -
6F2T0207 (0.01)
(→p. 362). See PLC#3 of
M/O
O
O
O
O
M/O
O
O
O
O
M/O
O
O
O
O
GRE200 (5,6)
Advertisement
