Settings Relating To Signal Outputs (Output Menu) - Sony DVS-9000 User Manual

Production switcher system

Hide thumbs Also See for DVS-9000:

Table of Contents

In the <Video/Key> group (when an SDI-interfaced MVE-8000A/9000 is

used) or the <External Video> group (when an SDI-interfaced MVE-9000

is used), press the desired button, and set the TBC center position to 0H,

0.5H, or 1H.

Settings Relating to Signal Outputs (Output Menu)

To make settings relating to DME output signals, display the DME >Output

To display the Output menu

In the Engineering Setup menu, select VF4 'DME' and HF3 'Output.'

Adjusting the monitor output

When the MVE-8000A/MVE-9000 is connected through SDI interface, you

can adjust both DME1 and DME2 output video clip levels.

Use the following procedure. (DME 1 is taken by way of example.)

In the <DME1(Ch1-Ch4)> group of the DME >Output menu, press [Clip

Adjust], turning it on.

Set the following parameters.

To return the setting to the default value

In the DME >Output menu, press [Default].

Setting the monitor output

To set the signals output from the four monitor output connectors, use the

following procedure.

Input number selection

White clip adjustment

Dark clip adjustment

Chroma Clip Chroma clip adjustment

Setting values

Setting values

90.00 to 109.02

−6.85 to +10.00

90.00 to 113.17

Setup Relating to DME