Sony DVS-9000 User Manual page 166

Production switcher system

Hide thumbs Also See for DVS-9000:

Table of Contents

starts from the current position, in the same way as with a VTR (no automatic

• During file playback, to play the next keyframe at variable speed, for the next

keyframe set variable speed only, and do not set the start point (see figure

a) In keyframe 2, set variable speed only, and do not set the start point.

• When using a disk recorder with the VTR/disk recorder timeline, if you carry

out the following sequence of operations, the system may freeze on the frame

of the start point.

1. Press the [RUN] button to play to a point close to the end of a file.

2. Stop playback.

3. Press the [RUN] button once more.

In such cases, first recall a different register, then carry out the following

1. Recall the original register again.

2. Press the [REWIND] button.

3. Press the [RUN] button.

• Some operating limitations apply when the video disk communications

protocol is used. These are explained with reference to the following figure,

which illustrates creation of a timeline that plays from the video of file A to

the video of file B.

– Operation with no problems:

KF1 action setting

– Black video or still image appears momentarily when play switches from

file A to file B:

Playback at set variable speed

Operating status of file

Control of VTRs, Extended VTRs, and Disk Recorders

KF2 action setting