Sony DVS-9000 User Manual page 102
Production switcher system
Hide thumbs
Also See for DVS-9000:
- User manual (1228 pages) ,
- Installation manual (42 pages) ,
- Operation manual (24 pages)
Table of Contents
Advertisement
Knob
2
3
5
a) Setting is available when nonlinear effect page turn, roll, cylinder, or sphere is selected.
b) You can make the Lighting effect more effective by adjusting [Total Ambient] to lower the
brightness of the entire image. This setting is used both by this effect and by the
Spotlighting effect.
Note
The Total Ambient parameter is not supported on the MVE-8000A.
Setting the bar shape of the highlight area
When you select [Bar] or [Preset] in step 3 of "Applying the Lighting effect"
(page 99), use the following procedure to set the shape of the bar.
1
Turn [Light Modify] on.
2
Adjust the following parameters.
Knob
1
2
3
4
5
a) For 4:3
b) For 16:9
Parameter
Adjustment
Ambient
Intensity of light in ambient area 0.00 to 100.00
Shade
Intensity of light in shade area
Total Ambient Brightness of whole image
Shade area
Highlight area
The three regions for which the light intensity can be set
Parameter
Adjustment
X
X-value of bar center point
Y
Y-value of bar center point
c)
Angle of bar
Angle
Width
Width of bar
Soft
Softness of edges
Setting values
a)
0.00 to 100.00
b)
0.00 to 100.00
Ambient area
Setting values
–8.00 to +8.00
a)
–6.00 to +6.00
b)
–4.50 to +4.50
–8.00 to +8.00
0.00 to 100.00
0.00 to 100.00
DME Special Effect Operations
101
Advertisement
Table of Contents
