Sony DVS-9000 User Manual page 118

Production switcher system

Hide thumbs Also See for DVS-9000:

Table of Contents

a) When Factory is selected

b) When User is selected. The setting value range depends on the number of texture patterns

Press [Set].

The texture selected in step 2 appears in the list on the left of the status

To display a test sphere

In the Spot Lighting menu, press [Test Sphere], turning it on.

A test sphere effect appears on the image surface.

Adjust the following parameter.

a) Light appears from Z direction. At –100.00 the light goes deepest, at +100.00 the whole

image is lit like a flat effect.

For details of the relationship of test spheres and light sources, see "DME

Special Effects" in Chapter 1 (Volume 1).

Setting light sources

Up to three light sources (Light 1 to Light 3) for Spotlighting can be set by

Light source menu

The following three light source menus are available.

Light source

The BZS-9471 Texture Lighting Software (for BKDS-9470) or BZDM-9050

Texture Lighting Software (for MVE-9000) is required to enable Light 2 and

Distance of light

DME >Light/Trail >Spot Lighting >Light 1

DME >Light/Trail >Spot Lighting >Light 2

DME >Light/Trail >Spot Lighting >Light 3

Setting values

101 and upwards

Setting values

–100.00 to +100.00

DME Special Effect Operations