Sony DVS-9000 User Manual page 169
Production switcher system
Hide thumbs
Also See for DVS-9000:
- User manual (1228 pages) ,
- Installation manual (42 pages) ,
- Operation manual (24 pages)
Table of Contents
Advertisement
6
7
8
9
10
11
Repeat steps 2 to 11 as required for other devices.
To carry out start point and stop point settings and cueing up
operations in the device control block
With the following buttons in the device control block, you can set the start
point or stop point of a keyframe point on the timeline, or carry out a cueing up
operation.
168
Control of VTRs, Extended VTRs, and Disk Recorders
If you do not want to set the start point, skip to step 8.
Note
For a disk recorder on which the start point is not set, the file recalled in
the disk recorder when the keyframe point is passed is the subject of the
action.
Set the start point as a timecode value.
Press [Enter].
The new start point setting is reflected in the status area.
To set the stop point, in the <Stop TC> group press the [Set] button.
A timecode window appears.
If you do not want to set the stop point, skip to step 11.
Set the stop point as a timecode value.
Press [Enter].
The new stop point setting is reflected in the status area.
To set the variable speed, in the <Variable Speed> group, carry out either
of the following.
• Press [Fit].
Without setting a speed value, this automatically carries out playback
according to automatically calculated values for the duration and
keyframe duration to fit the set start point and stop point.
• Press the [Set] button, and adjust the parameter with the knob.
Knob
Parameter
Setting
2
Variable
Variable speed
a) The setting range of the variable speed depends on the type of connected device.
The new variable speed setting is reflected in the status area.
Setting values
a)
–100 to +200
Advertisement
Table of Contents
